Environment Monitoring System IP Temp CAT5 Video Extender HDMI VGA DVI KVM Switch, Video Splitter, Video Matrix Switch
Single Photobeam Detector, Indoor/Outdoor to 50'
Single Photobeam Detector, Indoor/Outdoor to 50'

Single Photobeam Detector, Indoor/Outdoor to 50'

NTI Part #: E-PBD-SO50

Overview

  • Single-beam infrared motion sensor sends alert signal when invisible beam is broken.
  • Sensing range: 3 to 50 feet (1 to 15m)
  • Light Source: Infrared LED, wavelength 940nm
  • LED Beam Spread Angle: Approximately ±10°
  • Built-in AGC control to filter out lighting disturbances.
  • LED indicator for power, signal strength, and alarm.
  • NO/NC relay (set by jumper, default is N.C.)
  • Screw terminal.
  • Connect to digital input or RJ45 sensor ports on an E system.
    • To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
    • To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
  • Operating temperature: -13 to 131°F (-25 to 55°C).
  • Dimensions WxDxH (in): 1.94x3x1.19 (48x76x30 mm)
  • Max current consumption:
    • Transmitter: 15mA @ 12VDC.
    • Receiver: 30mA @ 12VDC.
  • Powered by the E-2D/5D/16D.
  • Includes mounting hardware.
  • IP65 enclosure.

Downloads